Purchase the the Smart Bridge Starter Kit with In-Wall Dimmer for just $79.95 and save 20% until June 16th!

Go to the Design & Shop tab and select Connected Home, Remotes & Accessories to save now.

$79.95 price for Smart Bridge Starter Kit with In-Wall Dimmer (P-BDG-PKG1W) expires 11:59 PM EDT 6/16/19. Offer cannot be combined with other offers or applied to previously purchased product or professionally installed jobs. Offer is valid on direct consumer orders placed on serenashades.com only. Shade Specialists are available 7 days a week (M-F 8 a.m. – 8 p.m. EDT, S-S 9 a.m. – 6 p.m. EDT).

Terms and Conditions

1. Acceptance of Orders/Terms:

All orders are subject to acceptance by Lutron Electronics Co., Inc. ("SUPPLIER") at its Coopersburg, PA headquarters. SUPPLIER reserves the right to reject any order. Possession of a price list does not constitute an offer to sell. Acceptance of any order by SUPPLIER is expressly conditioned on Customer’s assent to the terms and conditions set forth herein (“Terms”) and the waiver by Customer of any terms and conditions contained in any order form, confirmation, or any other communication of Customer, whether previously or hereafter delivered to SUPPLIER, which either add to, differ from, modify, conflict with or are otherwise inconsistent with any term or condition herein. SUPPLIER hereby gives notice of its objection to any additional or different terms or conditions in any such order form, confirmation or communication. Customer’s failure to object in writing to these Terms prior to the earlier of Customer’s acceptance of the products ordered or fifteen (15) days after delivery thereof to Customer will constitute agreement by Customer to these Terms. SUPPLIER hereby gives notice of its objection to any additional or different terms or conditions in any such order form, confirmation or communication.

2. Hold for Release Orders:

An order may be placed on a hold-for-release basis. Prices are firm for 3 months from date of order acceptance. The price of all hold-for-release orders not released by Customer for immediate shipment within 3 months from the date of order acceptance will be increased up to 10% increase over the initial order price to cover additional cost of labor and material. All holdfor-release orders not released for immediate shipment within 6 months from the date of order acceptance may be cancelled by SUPPLIER and subject to a 25% cancellation charge based on the price of the order.

3. Product Changes:

SUPPLIER reserves the right to discontinue the manufacture or sale of any product (“Supplier Product”) at any time or to alter, modify or redesign the Supplier Products.

4. Use of Trademarks:

Customer shall use SUPPLIER’s trademarks, logos or other identifiers in accordance with SUPPLIER’s Corporate ID Guidelines and Style Guide found at www.lutron.com/styleguide.

5. Price:

All prices are subject to change without notice. Should any governmental action or request prevent SUPPLIER from implementing any price or continuing any price already in effect, SUPPLIER may at its option cancel Customer’s order or any part thereof.

6. Taxes/Duties:

All prices exclude Taxes (as defined in Article 14) and are the sole responsibility of the Customer.

7. Credit Approval:

Customer credit approval is required prior to any shipment. If SUPPLIER determines at any time that Customer’s financial condition does not justify the extension of credit to Customer, then SUPPLIER may at its option require cash payments in advance or other satisfactory security prior to delivery.

8. Cancellation/Change Orders:

Orders for standard Supplier Products may only be revised or canceled by Customer prior to the date of loading at the place of shipment, and only with SUPPLIER’s prior consent. Orders for nonstandard or custom Supplier Products may only be revised or canceled by Customer prior to the commencement of production, and only with SUPPLIER’s prior consent. Any product which SUPPLIER has the capability of producing but does not inventory is considered a nonstandard or custom product. All cancelled orders, whether for standard Supplier Products or nonstandard or custom Supplier Products, shall be subject to a cancellation charge of 25% of the order price. If not cancelled as provided herein, Customer shall be liable for the full order price.

9. Packaging/Shipping/Risk of Loss:

Unless otherwise agreed by SUPPLIER in writing (i) SUPPLIER shall select the method of shipment and carrier, and (ii) costs for shipping shall be billed to Customer in accordance with the carrier's then current price list. Costs for special packaging and/or handling requested by Customer shall be the responsibility of Customer. The risk of loss, damage or shortage of SUPPLIER Products shall pass to Customer upon delivery to the carrier regardless of notice to Customer. SUPPLIER assumes no responsibility for insuring shipments unless specifically agreed to in writing by SUPPLIER, in which case the cost of insurance shall be for Customer’s account. LUTRON® ELECTRONICS CO., INC. TERMS AND CONDITIONS OF SALE 131

10. Title:

Title to the Supplier Products shall only pass to the Customer upon the occurrence of any one of the following events: (i) the Customer having paid to the SUPPLIER all sums (including any default interest, if applicable) due from it to the SUPPLIER under the applicable invoice between the SUPPLIER and the Customer and SUPPLIER having received such payment as defined in the these Terms, or (ii) the SUPPLIER serving on the Customer notice in writing specifying that title to the Supplier Product has passed. Until title to the Supplier Product has passed to the Customer as set forth herein, the Customer shall possess the Supplier Product as a fiduciary and bailee of the Seller. If the SUPPLIER so requires, Customer shall store the Supplier Product separately from other goods and shall ensure that they are clearly identifiable as belonging to the SUPPLIER. The SUPPLIER may recover Supplier Product in respect of which title has not passed to the Customer at any time and the Customer irrevocably licences the SUPPLIER, its officers, employees and agents to enter upon any premises of the Customer, with or without vehicles, for the purpose either of recovering goods in respect of which title has not passed to Customer or confirming that the Supplier Product is being stored and/or identified as required by SUPPLIER.

11. Delivery:

Quoted shipping and/or delivery dates are based on estimates at the time of order. SUPPLIER shall use reasonable commercial efforts to meet such shipping and/or delivery dates, but SUPPLIER shall not be liable for any direct or indirect costs or damages, including without limitation incidental or consequential damages, resulting from late deliveries. Except as expressly provided otherwise herein, Customer agrees to purchase and pay for all material ordered as specified on SUPPLIER’s invoice.

12. Claims for Loss, Damage or Shortage:

Any claims for damage, loss or shortage should be filed by Customer with the respective transportation carrier in writing immediately upon receipt of the Supplier Products. In no event shall SUPPLIER be liable for damage or loss to a shipment caused by a carrier. If shortage exists with respect to any shipment and it is not concealed, Customer shall secure a notation of such shortage from the carrier on the freight bill or delivery receipt. If shortage is concealed, Customer must notify the carrier and SUPPLIER within 15 days. No claims for damage, loss or shortage will be allowed unless they are accompanied by an inspection report or signed delivery receipt noting such damage, loss or shortage signed by a representative of the carrier and forwarded to SUPPLIER within 30 days of the invoice date.

13. Return of SUPPLIER PRODUCT:

Customer may return new and unopened Supplier Product in accordance with Supplier’s Returned Goods Policy in effect on the date each order is accepted and as authorized by Supplier on a Return Good Authorization, with the exception of nonstandard, custom Products and metal wall plates which are not returnable. Customer will be charged a minimum restocking charge of 25% of the cost of the returned goods and shall be responsible for freight and duties to return the Supplier Product. SUPPLIER’s Returned Goods Policy may be found in SUPPLIER’s Price List as well as at http://dims.lutron.com. SUPPLIER reserves the right to amend its Returned Goods Policy from time to time, as updated at http://dims.lutron.com.

14. Payment:

All invoices, whether partial or in full, shall be due and payable in full by Customer pursuant to the terms set forth thereon. Invoices not timely paid are subject to an interest charge of 1.5% per month on any unpaid balance or the maximum rate allowed by law, which interest charges shall accrue beginning on the invoice due date. If Customer (i) becomes insolvent, files or has filed against it a petition in bankruptcy, makes any assignment for the benefit of creditors, or has a receiver or trustee appointed for it or its property, (ii) takes action to liquidate or otherwise cease doing business as a going concern, (iii) undergoes a change in ownership, (iv) fails to provide adequate assurance or security for credit extended, or (v) takes any other action that SUPPLIER determines in its sole discretion adversely impacts the conditions under which credit was extended, then all amounts outstanding from Customer hereunder shall at SUPPLIER’s option become immediately due and payable. ALL PAYMENTS, WHETHER UNDER THE STANDARD PAYMENT TERMS OR OTHERWISE, SHALL BE CONSIDERED RECEIVED BY SUPPLIER AS FOLLOWS: (A) FOR PAYMENTS BY CHECK, WHEN THE CHECK IS RECEIVED AT SUPPLIER’S DESIGNATED PAYMENT LOCATION, AND (B) FOR PAYMENTS BY ELECTRONIC FUNDS TRANSFER, THE BUSINESS DAY ON WHICH THE FUNDS ARE IMMEDIATELY AVAILABLE TO SUPPLIER. TERMS AND CONDITIONS 132. Customer shall pay all undisputed invoices regardless of any dispute that may exist as to other delivered or undelivered goods. With respect to any disputed invoice, Customer shall pay all amounts not in dispute. Customer expressly waives the right to assert any offset or counterclaim with respect to amounts due under any invoice issued by SUPPLIER hereunder. Customer shall make and remit any payments due SUPPLIER free and clear of, and without deduction or withholding for, any present or future taxes, levies, imposts, duties, fees, assessments or other charges of whatever nature (“Taxes”) now or hereafter imposed by any jurisdiction or by any political subdivision or taxing authority thereof or therein with respect to such payments and all interest, penalties or similar liabilities with respect thereto. If Customer or any other person is required by any law or regulation to make any deduction or withholding on account of any Taxes from any payment to the SUPPLIER due under this Agreement, Customer shall, together with such payment, pay such additional amount (“gross up”) as to ensure that SUPPLIER receives full payment. Customer represents and warrants to SUPPLIER that the full amount of any such deductions or withholding shall be accurately and timely paid over to the relevant authorities and Customer shall promptly forward to SUPPLIER copies of official receipts or other evidence satisfactory to SUPPLIER regarding such payment. Customer shall also agree to fully indemnify and hold SUPPLIER harmless, and reimburse SUPPLIER upon its written request, for the amount of any Taxes so levied or imposed and paid by SUPPLIER. Notwithstanding the generality of the forgoing, Customer shall be responsible for any provincial, state or local tax (excluding taxes based on SUPPLIER’S income or profits) that results from the transfer of title or sale or delivery of the Products purchased hereunder unless a valid and correct tax exemption certificate is furnished to SUPPLIER prior to delivery.

15. SUPPLIER Obligations/Limitation of Liability:

SUPPLIER PRODUCT DELIVERED HEREUNDER AND ALLEGED TO BE DEFECTIVE OR OTHERWISE OPENED AND THEN RETURNED TO CUSTOMER BY AN END-USER MAY BE RETURNED BY CUSTOMER TO SUPPLIER FOR A PERIOD UP TO ONE (1) YEAR FROM THE DATE OF SALE BY CUSTOMER TO END-USER. UPON RETURN OF SUPPLIER PRODUCT BY CUSTOMER, SUPPLIER MAY ELECT, AT ITS SOLE OPTION, TO RETURN THE CONSIDERATION PAID BY CUSTOMER TO SUPPLIER FOR SUCH RETURNED PRODUCT OR TO DELIVER CONFORMING PRODUCTS TO CUSTOMER. THE PRODUCT-SPECIFIC WRITTEN WARRANTIES PROVIDED IN OR WITH THE SUPPLIER PRODUCT ARE INTENDED EXCLUSIVELY FOR THE BENEFIT OF THE END-USER AND NOT CUSTOMER. THE FOREGOING IS THE ONLY OBLIGATION OF SUPPLIER TO CUSTOMER RELATING TO DEFECTIVE PRODUCTS AND IS IN LIEU OF ALL OTHER OBLIGATIONS OR WARRANTIES, EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SUPPLIER BE RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL, INDIRECT OR SPECIAL DAMAGES OF ANY KIND.

16. Remedies of Customer:

THE SOLE AND EXCLUSIVE REMEDY OF CUSTOMER AND THE SOLE AND EXCLUSIVE OBLIGATION OF SUPPLIER FOR ANY BREACH OF CONTRACT CLAIM THAT SUPPLIER PRODUCTS DELIVERED DO NOT OTHERWISE CONFORM TO THE ACCEPTED ORDER SHALL BE EITHER THE RETURN OF CONSIDERATION PAID BY CUSTOMER TO SUPPLIER RELATED TO THE BREACH, OR UPON SUPPLIER’S ELECTION, THE DELIVERY OF CONFORMING SUPPLIER PRODUCTS TO CUSTOMER. WITH RESPECT TO SUPPLIER’S NONCOMPLIANCE WITH ANY OTHER OBLIGATION OF SUPPLIER HEREUNDER, THE SOLE AND EXCLUSIVE REMEDY OF CUSTOMER AND THE SOLE AND EXCLUSIVE OBLIGATION OF SUPPLIER WILL BE AS SUPPLIER IN ITS DISCRETION WILL DETERMINE AS FOLLOWS: (1) SUPPLIER MAY ELECT TO CURE SUCH NONCOMPLIANCE WITHIN A REASONABLE PERIOD OF TIME, OR (2) IF SUPPLIER FAILS TO CURE SUCH NONCOMPLIANCE, CUSTOMER MAY RECOVER AN EQUITABLE AMOUNT NOT TO EXCEED SUCH CHARGES AS WERE PREVIOUSLY PAID TO SUPPLIER BY CUSTOMER RELATING TO THE BREACH. CUSTOMER WAIVES ALL OTHER REMEDIES, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, THE REMEDIES OF SPECIFIC PERFORMANCE AND REPLEVIN. ANY ACTION BROUGHT BY CUSTOMER IN CONNECTION WITH SUPPLIER’S PERFORMANCE HEREUNDER MUST BE COMMENCED WITHIN SIX (6) MONTHS TERMS AND CONDITIONS 133. AFTER SUCH CAUSE OF ACTION ACCRUES OR IT WILL BE DEEMED WAIVED. SUPPLIER’S LIABILITY TO CUSTOMER, REGARDLESS OF WHETHER SUCH LIABILITY ARISES IN CONTRACT, TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, SHALL IN NO EVENT EXCEED AMOUNTS PAID BY CUSTOMER TO SUPPLIER FOR THE SUPPLIER PRODUCTS INVOLVED, AND CUSTOMER RELEASES SUPPLIER FROM ALL CLAIMS AND LIABILITIES IN EXCESS OF THIS LIMITATION. IN NO EVENT SHALL SUPPLIER BE RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL, INDIRECT OR SPECIAL DAMAGES OF ANY KIND.

17. Excused Performance:

SUPPLIER shall be under no liability for any failure to perform any of its obligations under these Terms or any contract if and to the extent that the failure is caused by reason of any cause outside the control of the SUPPLIER. Delivery suspended or not made by reason of force majeure shall be canceled without liability, but the Terms shall otherwise remain unaffected. SUPPLIER may allocate its available supply of Supplier Products or materials among itself and its customers in its sole discretion and without liability to Customer.

18. Compliance with Laws, Regulations & Orders:

Customer warrants that it will comply at all times with all laws (including customs, import and export laws), ordinances, rules, requirements and regulations applicable to the Products and when requested, shall furnish evidence to SUPPLIER of such compliance, including without limitation U.S. laws and regulations relating to exports, export controls, and foreign corrupt practices. SUPPLIER hereby certifies that the Supplier Products sold hereunder that were produced in the United States were produced in compliance with all applicable requirements of Sections 6, 7 and 12 of the Fair Labor Standards Act, as amended, and of regulations and orders of the United States Department of Labor issued under Section 14 thereof. When SUPPLIER sells Products to Customers outside of the United States, Customer shall be responsible for obtaining any and all necessary import licenses, certificates of origin or other requested documents and for paying all applicable customs duties and levies, insurances, transportation costs as specified in the purchase order, Taxes and any other expenses in respect of the importation of the SUPPLIER Products into any country outside the United States. If required by SUPPLIER, all the corroborative documentation must be presented to SUPPLIER upon request.

19. Entire Agreement:

The terms and conditions contained herein constitute the entire agreement between SUPPLIER and Customer and supersede any and all prior agreements, whether oral, written or implied. No modification of these terms and conditions shall be effective unless made in writing and executed by SUPPLIER.

20. General:

This agreement shall not be assigned by Customer without the prior written consent of SUPPLIER, and any assignment made without such consent shall be null and void. This agreement shall inure to the benefit of and be binding upon the parties hereto and their respective successors and permitted assigns. This agreement shall be governed by and construed in accordance with the laws of the Commonwealth of Pennsylvania, without giving effect to its conflicts of law provisions. Customer hereby expressly consents to the exclusive jurisdiction of the Pennsylvania courts to settle any disputes arising from these terms or the sale of Supplier Product to Customer.